Home  About Us Products Technical Data Environment Contact FAQ Links Downloads HR TR | EN  
Plastech
 
 
 


Pet
General Dimensions and Colours
Composition and Features
Physical and Mechanical Properties
Test Reports
Application Areas
Pet | Physical and Mechanical Properties

Physical and Mechanical properties :


  Property Dimension Standard Value
1 Density g/cm3 DIN EN ISO 1183 1,34
2 Modulus of elasticity (tensile) Mpa DIN EN ISO 527-3, 1B/50, 1 mm/min till 5 Mpa, in direction of production 2460
3 Tensile stress at yield Mpa DIN EN ISO 527-3, 1B/50, 1 mm/min till 5 Mpa, in direction of production 41,5
4 Elongation at yield % DIN EN ISO 527-3, 1B/50, 1 mm/min till 5 Mpa, in direction of production 2,3
5 Breaking strength (20 ºC) Mpa DIN EN ISO 527-3, 1B/50 in direction of production 31,8
6 Elongation at break % DIN EN ISO 527-3, 1B/50 in direction of production 15,3
7 Modulus of elasticity (flexion) Mpa DIN EN ISO 178, 2 mm/min till 1,5%, then 10 mm/min 2250
8 Flexural strength at 3.5 % flexion Mpa DIN EN ISO 178, 2 mm/min till 1,5%, then 10 mm/min 61,5
9 Flexural strength , maximum Mpa DIN EN ISO 178, 2 mm/min till 1,5%, then 10 mm/min 64,8
10 Impact strength at +23 ºC KJ/m2 DIN EN ISO 179-1/1eU, in direction of production, support distance 62 mm, 4 Joule Hammer 89,7
11 Impact strength notched at +23 ºC KJ/m2 DIN EN ISO 179-1/1eU, in direction of production, support distance 62 mm, 0,54 Joule Hammer and 1 Joule hammer (ABS) 21,6
12 Vicat softening point KJ/m2 DIN EN ISO 306, 50 K/h, load 50 N, procedure B 95
13 Water vapor permeability g/(m2d) DIN EN ISO 15106-3 at 23 ºC, 85% to 0% relative humidity 3,32
14 Glass transition temperature ºC DIN EN ISO 11357-2 at 20 K/min 1,1 and 107,2
15 Melting temperature (Peak) ºC DIN EN ISO 11357-3 at 20 K/min ---2)
16 Crystallization temperature ºC DIN EN ISO 11357-3 at 20 K/min ---2)
17 Shore D hardness - DIN 53505 80
18 Lineer coeffficient of thermal expansion (23-80 ºC) 10-5 1/K ISO 11359-2, procedure B, 5 K/min in direction of production 9,7
  1) Samples were too thin, no testing was possible
  2) Temperature range from 0 to 75 ºC, above 75 ºC the sample was too soft to be tested

The information and recommendations in this website are accurate and reliable to the best of our knowledge, however users should perform their own tests to determine the suitability of these products for their own particular purposes.


PET Sheet

Thickness Sheet Sizes Colour Surface Sheet quantity
mm 1000x1400 1250x2050 1400x3000   Matt Glass per palet
0,30 x x x transparent

and

white

x x 2000/1000/600
0,40 x x x x x 1400/700/400
0,50 x x x x x 1000/6000/350
0,60 x x x x x 900/500/300
0,70 x x x x x 750/450/250
1,00 x x x x x 540/300/180


Plastech                           Home  About Us Products Technical Data Environment Contact FAQ Links HR

All Rights Reserved © 2009. Plastech is an MT Displays subsidiary. snap frame