Anasayfa  Hakkımızda Ürünler Teknik Bilgi Çevre İletişim Linkler İndir İK TR | EN  
Plastech
 
 
 


Pet
Genel Boyutlar ve Renkler
Kompozisyon ve Özellikleri
Fiziksel ve Mekanik Özellikleri
Test Sonuçları
Uygulama Alanları
Pet | Fiziksel ve Mekanik Özellikleri

Fiziksel ve Mekanik Özellikler:


  Property Dimension Standart Değer
1 Yoğunluk g/cm3 DIN EN ISO 1183 1,34
2 Elastik Özellikleri (Çekme) Mpa DIN EN ISO 527-3, 1B/50, Üretim yönünde 5 Mpa kadar 1 mm / dak, 2460
3 Verimi Çekme gerilmesi Mpa DIN EN ISO 527-3, 1B/50, Üretim yönünde 5 Mpa kadar 1 mm / dak, 41,5
4 Uzama % DIN EN ISO 527-3, 1B/50, 1 mm/min till 5 Mpa, in direction of production 2,3
5 Kırılma Mukavemeti (20 ºC) Mpa DIN EN ISO 527-3, 1B/50 in direction of production 31,8
6 Kopma anındaki uzama % DIN EN ISO 527-3, 1B/50 in direction of production 15,3
7 Modulus of elasticity (flexion) Mpa DIN EN ISO 178, 2 mm/min till 1,5%, then 10 mm/min 2250
8 Flexural strength at 3.5 % flexion Mpa DIN EN ISO 178, 2 mm/min till 1,5%, then 10 mm/min 61,5
9 Flexural strength , maximum Mpa DIN EN ISO 178, 2 mm/min till 1,5%, then 10 mm/min 64,8
10 Impact strength at +23 ºC KJ/m2 DIN EN ISO 179-1/1eU, in direction of production, support distance 62 mm, 4 Joule Hammer 89,7
11 Impact strength notched at +23 ºC KJ/m2 DIN EN ISO 179-1/1eU, in direction of production, support distance 62 mm, 0,54 Joule Hammer and 1 Joule hammer (ABS) 21,6
12 Vicat softening point KJ/m2 DIN EN ISO 306, 50 K/h, load 50 N, procedure B 95
13 Water vapor permeability g/(m2d) DIN EN ISO 15106-3 at 23 ºC, 85% to 0% relative humidity 3,32
14 Glass transition temperature ºC DIN EN ISO 11357-2 at 20 K/min 1,1 and 107,2
15 Melting temperature (Peak) ºC DIN EN ISO 11357-3 at 20 K/min ---2)
16 Crystallization temperature ºC DIN EN ISO 11357-3 at 20 K/min ---2)
17 Shore D hardness - DIN 53505 80
18 Lineer coeffficient of thermal expansion (23-80 ºC) 10-5 1/K ISO 11359-2, procedure B, 5 K/min in direction of production 9,7
  1) Samples were too thin, no testing was possible
  2) Temperature range from 0 to 75 ºC, above 75 ºC the sample was too soft to be tested

The information and recommendations in this website are accurate and reliable to the best of our knowledge, however users should perform their own tests to determine the suitability of these products for their own particular purposes.


PET Levha

Kalınlık Levha Boyutu Renkler Y Sheet quantity
mm 1000x1400 1250x2050 1400x3000   Mat Parlak Solgunt
0,30 x x x Şeffaf

and

Beyaz

x x 2000/1000/600
0,40 x x x x x 1400/700/400
0,50 x x x x x 1000/6000/350
0,60 x x x x x 900/500/300
0,70 x x x x x 750/450/250
1,00 x x x x x 540/300/180


Plastech                           Anasayfa  Hakkımızda Ürünler Teknik Bilgi Çevre İletişim SSS Linkler İK

All Rights Reserved © 2009. Plastech is an MT Displays subsidiary.